Total Mechanical Solutions

04/08/2024

Mega Filter 🧼

Let's talk about filtration
Did you know that the design of your HVAC filter can significantly impact your system’s efficiency and your indoor air quality? This system boasts a design filter pressure drop of just 0.05 inwc with MERV 13 standard pleated filters, compared to the typical 0.25 inwc drop of a standard 1” pleated filter. A low-pressure drop means less strain on your system and more energy savings.

•

01/28/2024

Flex is king 👑

Or atleast properly install flex is. Flex is the easiest duct material to install and therefore often gets installed poorly. When it comes to crawl spaces and attics we typically use a hybrid design duct system. We utilize rigid ducting with aqueduct pressure reductions for our trunks and flex for our branches. On return and supply branch runs we utilize rigid pipe, dampers, elbows and adequate supports where needed. Flex can be as good or bad as you want it to be.

•

11/07/2023

Swap ➡️

Budget job and even then we still prioritize filtration/performace with a media filter cabinet a larger return drop.

•

02/21/2023

A little coil cleaning action 🧼

Some coil cleaning action 🧼 •

01/23/2023

We are beyond grateful to Bryant Colorado for the continued support with the donation of these furnaces that will be installed in the two affordable homes we are currently constructing. Thank you for making our mission possible!

01/23/2023

shared a post on Instagram: "📈We fixed this poorly zoned system and now it couldn’t be working more flawlessly 🤩 We will still need to come back to wrap up a couple task before inspection. • ...

11/29/2022

This was our companies first time performing annual heating maintenance on this system. We found found a heat exchanger that was completely shot. Now it's up to the property management on what they want to do.
•

11/06/2022

Customer wanted to turn the closet into an expansion so we moved the returns and furnace to the crawlspace, and added a heat pump. Very pleased customer 😍
•



•

10/29/2022

A good clean install is very important but it’s even more important to ensure peak performance of the system. This homeowner struggled with the upstairs being uncomfortable and is now stoked with the results of his of his new duel fuel system. We increased the comfort and overall performance of the new system. It started with a detailed load calculation, detailed airflow measurement and a thorough equipment selection. This right here is what separates tradesmen and craftsmen. Here at TMS we are the craftsmen, bettering our trade every single day.
•


•