L & R Fabrications

L & R Fabrications L & R Wewdshop, pronounced "Weu-d-shop", is a husband and wife (Lisa&Rob) woodworking duo, who are j

We finally installed the dust collection ducting. Another step in the right direction!
10/03/2020

We finally installed the dust collection ducting. Another step in the right direction!

We built some cabinets over the last week. Still a lot to be done before we are finished setting everything up. Its been...
08/27/2020

We built some cabinets over the last week. Still a lot to be done before we are finished setting everything up. Its been hard to find the time with both of us working full time. Slowly but surely.

We put this french cleat wall up today and built drill storage. Each board is cut at a 45 degree angle at the top. Anyth...
08/02/2020

We put this french cleat wall up today and built drill storage. Each board is cut at a 45 degree angle at the top. Anything that is hung on the wall has a 45 degree cut board along the back to fit onto the wall. This way storage and organization can be placed on any point along the wall.

6 hours of assembly for our newest addition to the shop. A Laguna 3hp dust collector. Next step is to set up the 8" met...
07/22/2020

6 hours of assembly for our newest addition to the shop. A Laguna 3hp dust collector. Next step is to set up the 8" metal ducting around the room to where the tools will be. Everything is slowly coming together. 😁

Hello all, we know its been a while since we posted anything, but we just wanted to give you an update as to the reason....
07/15/2020

Hello all, we know its been a while since we posted anything, but we just wanted to give you an update as to the reason. We recently moved to our new house a few months ago and have been in the process of renovating our basement for the new shop. Things are coming along fairly well and should be ready to go in another month or so. The images posted are the progress we've made so far. Today we were able to move a few things into the new shop, but theres still quite a bit to set up.

Bowl made from a walnut log.
03/12/2020

Bowl made from a walnut log.

Maple and walnut bowl turned on the lathe. Quite the process, but so worth it!
02/18/2020

Maple and walnut bowl turned on the lathe. Quite the process, but so worth it!

We have a new addition to our shop! A wood turning lathe. This birch plywood vase is one of the first things we've made...
01/22/2020

We have a new addition to our shop! A wood turning lathe. This birch plywood vase is one of the first things we've made.

Our first river cutting board. Hope to some day make tables like this! Made from walnut and epoxy resin.
11/10/2019

Our first river cutting board. Hope to some day make tables like this! Made from walnut and epoxy resin.

Our latest finished project. 😍
10/04/2019

Our latest finished project. 😍

Address

Tolland, CT
06084

Website

Alerts

Be the first to know and let us send you an email when L & R Fabrications posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category