Timber Ridge Forge

02/07/2026

Power Arm Clamp for Wilton Power Arm Junior Vise Combo. Custom Replacement. Stainless Hardware.

Description:

Power Arm Clamp designed to mount and lock down a Wilton Power Arm Junior and vise combo.

This clamp was created to replace the original Wilton version, which has been out of production for many years and is now extremely collectible and difficult to find. This model was made specifically to fill that gap in the market and provide a functional, modern alternative.

This is a newly made clamp, not an original Wilton part.

Materials and construction:

The clamp body, movable lower jaw, and k**b are made from a composite consisting of approximately 60 percent high density iron and 40 percent PLA polymer. This provides strength and durability while keeping overall weight reasonable.

The threaded screw and sleeve are stainless steel for smooth operation and corrosion resistance.

Specifications:

Designed for Wilton Power Arm Junior and vise combo
Approximate weight: 2 pounds
Approximate dimensions:
Height: 6 inches
Width: 4.5 inches
Depth: 5 inches

Condition:

New. Custom made replacement clamp.

Notes:

This listing is for the clamp only. Power arm and vise are not included.

Price $250.00

11/24/2025

Parker bears reproductions

11/23/2025

https://ebay.us/m/nC7EvE

The J2 Baby Vise is roughly two-thirds the size of the classic Wilton Baby Bullet, making it lighter yet still fully functional — not just a display piece. • Serial Number: 003 (J2 Series). • (1) Lieberman Bullet Vise.

11/18/2025

Custom 2” Jeweler Vises These are functional and are 2/3rd the size of a Wilton baby bullet.

Message me for more information

10/27/2025

https://ebay.us/m/IkkEtS

The J2 Baby Vise is roughly two-thirds the size of the classic Wilton Baby Bullet, making it lighter yet still fully functional — not just a display piece. • (1) Lieberman Bullet Vise. • Serial Number: 0001 (first in the J2 Series).

05/26/2025

https://ebay.us/m/9xR4eR

Handcrafted American-Made Baby Vise – Serial #0001 – Early V Series Model – Supports Animal Rescue

You are viewing the first production unit of a special, American-made baby vise — hand-built with pride and purpose to honor the legacy of iconic U.S. toolmakers like Wilton and other classic American vise designs of the past.

🔧 Product Highlights:
• Jaw Width: 2 inches
• Jaw Opening: Opens approximately 1 inch
• Overall Length: Approx. 5-3/4 inches
• Width: Approx. 3 inches
• Weight: Just over 1 lb
• Serial Number: 0001 – the first in the V Series
• Jaw Grip Strength: Tested to over 20 pounds

🎯 Built with Purpose & Precision
This vise was crafted as a tribute to American-made tools from a time when quality, durability, and pride in manufacturing were front and center. It’s locally made on the border of Chicago, less than 15 miles from the original Wilton factory — continuing the spirit of American manufacturing using modern methods and durable materials.

⚙️ Materials & Construction
• Body: Made from a high-strength filament blend (60% iron, 40% PLA) — offering durability, slight flexibility, and reduced weight
• Critical Components (Jaws, Handle, Spindle, Nut): Made of solid steel
• Functionality: Perfect for jewelry work, small-scale precision tasks, or as a display piece in any vintage or modern tool collection

💡 This model is a lighter and sleeker reinterpretation of the classic Baby Wilton, made with modern materials while staying true to traditional American toolmaking values.

📌 Please Note:
This is an early version of the V Series. While fully functional, some component fitment and design details are still evolving and may continue to improve in future versions.

💖 Giving Back:
All profits from this sale will go toward supporting an animal rescue of my choice —

🖼️ Please take a close look at the photos, and don’t hesitate to reach out with any questions. Your interest supports not only small-scale American manufacturing but also a cause that truly matters.

Thank you for looking — and thank you for supporting my first endeavor into the world of custom designed vises.

I may in the future also allow for custom vises with the customer’s name of choice on it .

01/18/2025

Here is a rare 9-600 Wilton Bullet Vise. These are no longer in production and the 9- series was only available in the 1960’s. This Wilton came in with the following issue that have been fixed or replaced. The 4 pins in the vise were replaced by the previous owner with square bar stock damaging the body. The jaw, anvil and front slide were damaged. The repairs made were new pins, end cap, welding and custom metal fabrication. The end result is a fully functional rebuilt 6” Wilton bullet. Located North east illinois.

01/07/2025

New Project. The previous owner for whatever reason thought that that whole thing we were taught as kids that you don’t sticker square block and round hole tried it. I had to remove square stock. It took three hours now it’s been soaked in a solvent. After that filing and welding.

05/17/2024

Tool sale time!!!

Local pickup is preferred but shipping is also an option. If you want something shipped it just has to meet these two requirements.

1. Value of $100 or more(not including shipping costs) got to be worth the effort.

2. If the weight is about 100lbs it’s on you to find a freight shipper willing to pick it up I am not throwing my back out load and unloading it from my truck. I can provide location zip code and dimensions.

Prices listed below

Pm me with any questions.

The anvil is around a 150lbs one edge is damaged fairly sure it’s a Peter Wright $600

Little anvils 40-500

The forge is a double burner needs kawool lining and refractory cement $300

The tongs are a variation of sizes and styles
$40 + each

Hammers ask

Buffalo quite 200 blower $250

Fire pot $200

Holland 46 $500

Wilton bullet $800 each these aren’t the common type

Work bench $1200

Located North of Chicago IL
Shipping is buyer arranged only

03/13/2024

Always interesting when trying a different method of restoration. Let’s just say this whole process of restoration of an Australian Circus poster that’s around 100 years old is daunting. the last final steps will be revealed shortly.

12/04/2023

Vintage ice cream parlor chair. I don’t think they were ever this comfortable.

10/27/2023

The super rare Wilton bullet 350SJ 3.5” rear jaw vise. It’s not 100% done and could use some parts replaced but it’s functional and looks good