What are the opening hours?

Monday 8am - 4pm Tuesday 8am - 4pm Wednesday 8am - 4pm Thursday 8am - 4pm Friday 8am - 4pm

Trademark Wood Products

Home
United States
Shakopee, MN
Trademark Wood Products

Since 2003, Trademark Wood Products has been a full-service custom and semi-custom cabinetry, custom millwork and furniture shop located in Shakopee, MN. O

Our approach is based on the belief that the design process is continuous and specific to each project and unique as our clients. Our goal is to provide the highest quality product to transform the space it will be lucky enough to be placed within. For homeowners, we create beautifully crafted wood products that fit your space as well as your needs and desires. For designers, our commitment to you

is unmatched. We work in unison with you and your client in providing quality craftsmanship and creative products to meet the desires and dreams of your client’s. Timeliness, accuracy in our estimates, and meeting the desired time frames with a value end product puts us ahead of any other wood working vendor. You and your clients will not be disappointed. For builders, we provide dedicated craftsmen that create unique quality and value for your prized possession – the homes you are building. For your business, we delicately marry efficiency and style so that you can work effectively, express your company’s personality and create a comfortable environment for your clientele. We accomplish this through creativity and collaboration. The bottom line - we make you look good.

10/14/2024

Something we don’t advertise very much is our capability to produce top tier exterior trim. This exterior crown (CO5 in our catalogue) made of vertical grain fir is stunning. Fir is great for exterior uses because of its resistance to rot and decay. We strive for excellence in everything we do and exterior trim is no different.

09/26/2024

Big things happening today! Welcoming our newest addition to the shop. This is a tub grinder for our scrap wood. This piece of equipment allows us to not only reduce our waste, but will keep us in the fast lane which in turn keeps your millwork in the fast lane. Growth necessitates a continual refining process and evolution of the way you do things. The same boiling water that softens the potato gardens the egg.

06/28/2024

African Mahogany super wide jambs. Where’s the glue seam? Grain matching looks like a simple process, but especially with exotic woods it can be very tricky and goes beyond just picking boards with similar grain patterns. In addition to grain pattern, you need to consider depth of shades and subtle hues and make sure to check for imperfections like tiny cracks and knots. These turned out great and we’re excited to get them to and see the final product!

06/20/2024

Casing with integrated back band. Casing and back band are two trim components that go hand in hand. The casing is wider, and the back band sits on top of the casing, providing depth and dimension to the overall profile. Over time, with moisture and temperature fluctuations, a small, visible seam between the casing and back band can develop. One possible solution is to integrate the two components into one piece. If you would like a sample, or would like to set up a tour of our shop, DM for details.

06/11/2024

Many of the projects we undertake at Trademark have non-standard board lengths exceeding the available lengths for the species required for their projects. In some cases, a glue joint is the appropriate solution to achieve these longer lengths. This is often seen with box beams and stair skirt boards. The solution we have found for beams or skirt boards that will be painted or stained a dark color is a long diagonal joint which allows for a longer, uniform glue surface that will provide more stability to the joint and allows for a straight, seamless surface that, once finished is almost imperceptible.

06/10/2024

Sometimes we get a request that exceeds the scope and capability of our moulders and we need to do things the old fashioned way with glue, router bits and a can do attitude. It’s becoming more and more rare to find people with the knowledge and skill set necessary to not only make these corbels and custom trim pieces, but to make them by hand and have them turn out perfect. Here at we are both honored and grateful to have talented craftsmen who have the old school knowledge to make difficult pieces by hand and make it look easy.

06/06/2024

Let’s talk different types of Tongue and Groove (T&G), particularly Shiplap and V-Groove. While similar, there are some important distinctions. Shiplap has a square tongue and a flat face. It also goes by the common term Nickel Gap because the gaps between each board are 1/8 of an inch, roughly the width of the American Nickel. V-Groove typically has a rounded tongue and an angled chamfer cut on both edges. Fun fact, before the advent of mass produced plywood and other roofing products, V-Groove was used as roofing substrate beneath the roof’s shingles. Today T&G is popular both inside and outside. Pictured is D-Grade cedar (darker wood) and #2 Gorman Pine (lighter wood). The last picture shows what a difference finishing can make. A clear or light stain/finish can really make the grain pop and add depth and dimension to the finished product. Sometimes it’s the little things that make the biggest difference. Link in bio.

06/04/2024

At Trademark we are constantly refining and adjusting our processes to meet the needs of our clients as well as our own internal needs so that we can keep you in the fast lane. One example is the choice in grit of sandpaper. If you are priming your trim, the primer you use may require a look at the grit of sandpaper we would use. For an oil-based primer our standard 150 grit will give you the desired finish when you apply your primer. If you are using a water-based primer, that tends to raise the grain and a 220 grit may be a more appropriate choice.

05/29/2024

Countertops generally aren’t the most interesting topic if you took a random poll, and it takes vision and creativity to create something that is both aesthetically pleasing and also durable. This desktop extension does just that. How could you see incorporating a countertops in your next project?

05/28/2024

At Trademark, we have hundreds of knife profiles which we are constantly adding to as we see and run different and unique projects. The reason we have so many is because we are a premium millwork shop that works with the best builders who do some of the most unique and eye-catching projects out there. If you have a vision for a unique molding or a unique component of your house or project, get a hold of us and see how we can help you.

05/24/2024

As we approach Memorial Day weekend, we take time to reflect with gratitude on the sacrifice of our men and women in uniform both domestically and abroad standing ready to do violence on our behalf so that we can sleep peacefully at night. Memorial Day is more than a long weekend, it is a celebration of the lives of the heroes who paid the ultimate sacrifice on behalf of the nation that they love. Hold your loved ones tight. Remember the fallen. Strength and honor. day

Address

Shakopee, MN
55379

Opening Hours

Monday	8am - 4pm
Tuesday	8am - 4pm
Wednesday	8am - 4pm
Thursday	8am - 4pm
Friday	8am - 4pm

Website

http://trademarkwood.com/contact

Alerts

Be the first to know and let us send you an email when Trademark Wood Products posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Trademark Wood Products:

Shortcuts

Want your business to be the top-listed Furniture Store in Shakopee?