Mitton Theme Design

Mitton Theme Design Theme sculpture and furniture is where I am now focused. A theme is just a story, and sometime a sto napkin drawing often are the start of projects.

This is the place I display projects and products that I personal design and fabricate. I have been doing this type of work for over 30 years, working for WDW, Blaine Kern, and my on different companies. I specialize in the ability to produce work from research material such as photos or magazine tear sheets. My long work history on a combination of Industrial design, Sculpture and Fabrication provide the ability to make these jobs happen.

08/20/2023

La Esmeralda.
Photo by Silver Pearl Photography.

05/18/2023

That what I am talking about, think, then do it! It is possible

I am now finishing the details. The basic sculpt has been completed for some time but it was the skin details and questi...
01/25/2023

I am now finishing the details. The basic sculpt has been completed for some time but it was the skin details and questions of how I am going to make the mold and cast the various parts.
I have begun yesterday to solve the final details on the actual wall mounting method. This will be a working light fixture. Therefore while that ‘boss cover’ will help hide the mounting, those details neeed to be worked out. Some of the curse of being a sculptor is those methods come to you during the middle of the night.

Ok I need feed back. If I spend the time and money to finish these is there a market? They would run close to 1000. Resi...
01/08/2023

Ok I need feed back. If I spend the time and money to finish these is there a market? They would run close to 1000. Resin and silicone are out if site and that would effect the finial price. Wired and ready to install conventional socket.

Occasionally I get to do work that requires multiple items. Rarely is there money to make a production mold. I tend to m...
01/08/2023

Occasionally I get to do work that requires multiple items. Rarely is there money to make a production mold. I tend to make molds that ‘will work’ for a short time. After 4 or 5 pulls I have made the parts that I need. No that is not what you were taught, but earning a living from art requires you to to find ways that keep the cost down. It is not a hobby or a scource if entertainment. Produce your concepts the way your skill level allows, but push yourself!

Occasional for Rich at prop source I create missing pieces. Here there was no foot board and one side rail was missing. ...
12/27/2022

Occasional for Rich at prop source I create missing pieces. Here there was no foot board and one side rail was missing. His projects are always challenging. He gives me a box full of urn pieces and ask if I can make the missing parts and and you know make it look ….right. Sometimes I can…. Sometimes, not so much.

Sometimes it is the small simple reposition of a tool. Move the Band saw 90 degrees around a post. I was having an occas...
12/26/2022

Sometimes it is the small simple reposition of a tool. Move the Band saw 90 degrees around a post. I was having an occasional long piece of material not have outfeed room.
It worked. However when I tried that on the next post where there were several tools it did not give me any difference. Moving paper cut outs on a drawing does not always work. The tools all have casters so the moving is not the problem.

Over the next few months I am going to look at changing my shop layout. While it looks impressive, a big project want fi...
12/21/2022

Over the next few months I am going to look at changing my shop layout. While it looks impressive, a big project want fit. So I am going to consider which machines and where they are located that I really use.

My last day and my first day at Regency display division of Walt Disney World experience. I started by sanding on the Ch...
12/17/2022

My last day and my first day at Regency display division of Walt Disney World experience. I started by sanding on the Cheshire Cat for a week. Working at a downdraft table using among other things, a very small pneumatic belt sander. Applying very small mixes of bondo and getting the surface perfect. It was a casting in a fire retardant resin that had a mold seam and a few shrink spots. Then I coated with a polyester filler primer. All of this was a totally new experience. Over the next few months that every increasing know flow continued. During my last week I worked with gatorfoam, which I had used and a special very quick set epoxy putty. Old and new skills blended constantly there.
But my son was about to be born and during that time when I need permanent employment they only were offering Casual Temporary Jobs.
So I returned to Ruston Louisiana and quickly took The Woodchuck Carving Company to a national market. Only in reflecting back on that time can I totally appreciate what a life changing time that it was.

Address

Powder Springs, GA

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+19046524552

Website

Alerts

Be the first to know and let us send you an email when Mitton Theme Design posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mitton Theme Design:

Shortcuts

Share

Category