Carolina Urban Lumber

Carolina Urban Lumber Carolina Urban designs and makes unique Custom Furniture and Custom Woodwork.

We produce many wood products from our repurposed trees that come down in and near our city that are otherwise not used.ATreecyce America certified sawmill

06/04/2026

Speak Easy in a model home! What…. This was a fun one, other than the 20’ wall….

06/03/2026

Luxury Upgrade!

06/03/2026

Recent install of three rooms of beams and a speakeasy wall and hidden door

We installed numerous beams, a Speak Easy wood wall with a flush hidden door, and completed the project for a local buil...
06/03/2026

We installed numerous beams, a Speak Easy wood wall with a flush hidden door, and completed the project for a local builder in a model home. The 20’ ceilings were a bit challenging, but we enjoy overcoming such obstacles.

05/20/2026

Our slabs came from real trees — up-cycled trees that grew right here in the Carolinas, came down in storms, were cleared from job sites, or were salvaged before they were lost forever. Our team milled them by hand, stickered them to dry, and now they're standing in our shop in Charlotte — ready for their next chapter.

This straight-edge ambrosia maple dining table was milled, flattened, and finished in-house — right here in Charlotte, N...
05/20/2026

This straight-edge ambrosia maple dining table was milled, flattened, and finished in-house — right here in Charlotte, NC. We built a custom base to complement the natural character of the wood, and crafted a matching leaf extension that integrates seamlessly so the table grows with your family, not against it.

Ambrosia maple gets its signature color variation from the ambrosia beetle — a tiny insect that leaves behind mineral streaks of blue, gray, and brown as it travels through the wood. What looks like imperfection is actually nature’s signature.

Ready to bring a piece like this into your home? DM us or visit the link in bio to start your custom build. 👇

CustomWoodwork CustomFurniture WoodInteriors HandcraftedWood BespokeWood CustomMillwork InteriorDesignInspiration InteriorDesign CharlotteNC CarolinaWood NCWoodworking SlabWood SawmillLife WoodIsGood DiningTableDesign

This is Deodar Cedar wrap-around mantel above a stacked stone fireplace in a Charlotte home, this mantel is the kind of ...
05/19/2026

This is Deodar Cedar wrap-around mantel above a stacked stone fireplace in a Charlotte home, this mantel is the kind of piece that stops every single person who walks into the room.

That’s what we do. DM us if you’re ready to find your statement piece. 👇

BespokeWood CustomMillwork InteriorDesign InteriorDesignInspiration WoodInteriors CustomFurniture CharlotteNCt

When this client came to us with their kitchen design, they had already made the bold choice — dark green cabinetry, gol...
05/18/2026

When this client came to us with their kitchen design, they had already made the bold choice — dark green cabinetry, gold hardware, white perimeter counters. All they needed was the centerpiece. And they knew exactly what they wanted: Black Walnut.

We built this butcher block island countertop from Black Walnut sourced right here in the Carolinas. The edge grain construction showcases the natural linear patterns of the wood, while the mix of rich chocolate heartwood and lighter sapwood streaks gives it that unmistakable depth and character you simply cannot buy off a shelf.

The satin finish lets the wood breathe and show its true color — warm, alive, and getting more beautiful every year.

Black Walnut is one of the most sought-after hardwoods in North America for good reason. It’s incredibly durable, naturally resistant to wear, and its color deepens and enriches over time rather than fading. For a high-use surface like a kitchen island, there’s no better choice.

If you’ve been dreaming about a custom walnut countertop, island top, or butcher block surface — we’d love to build it with you. Drop a comment or send us a message to get started. 👇

CustomWoodwork HandcraftedWood BespokeWood CustomMillwork InteriorDesign InteriorDesignInspiration WoodInteriors CustomFurniture CharlotteNC CharlotteWood CarolinaWood NCWoodworking WoodIsGood KitchenDesign CustomKitchen

They said stain it blue. We said — let’s make history. 🔵🪵This is a Double Waterfall White Oak countertop — custom built ...
05/15/2026

They said stain it blue. We said — let’s make history. 🔵🪵

This is a Double Waterfall White Oak countertop — custom built and stained a deep, rich blue for a home bar right here in the Carolinas. White Oak was chosen for a reason: its tight grain and natural character hold stain unlike any other species, letting the wood’s story show through even under color. The waterfall edges cascade straight to the floor on both ends — no seams, no shortcuts, just one continuous piece of craftsmanship. This isn’t furniture. This is a statement.

White Oak is one of the most versatile hardwoods in North America — naturally resistant to moisture, incredibly durable, and stunning under custom stain. It’s why we reach for it when a client wants something that lasts a lifetime and looks better every year.

DM us to talk about your custom bar, countertop, or live-edge project. We mill it, we build it, we deliver it. 🙌

CustomWoodwork HandcraftedWood CustomMillwInteriorDesign InteriorDesignInspiration WoodInteriors

Before it's a table, a floor, or a bar top — it's this. 🪵⚡Most people never see this part. They see the finished piece —...
05/15/2026

Before it's a table, a floor, or a bar top — it's this. 🪵⚡

Most people never see this part. They see the finished piece — the smooth surface, the rich grain, the craftsmanship. But it all starts right here, at the band saw, with a raw log and a skilled team who knows exactly how to read the wood before the first cut is ever made.

This log came to us from right here in the Carolinas. Our sawyers study every log before it hits the blade — looking at the grain direction, the diameter, the character marks — to figure out how to get the most beautiful and most useful lumber out of every single inch.

At Carolina Urban Lumber, we mill our own lumber from locally sourced logs. That means when you order a custom table, countertop, or live-edge slab from us, you're getting wood that was a tree in the Carolinas not long ago — and will be a piece of your home or business for generations. All of them have a Tree ID , this is ID 1152 and can be found on our website carolinaurbanlumber.com. This one is 48” x 54”

Drop a comment if you've ever watched a sawmill run — there's nothing quite like

Address

10412 Rodney Street
Pineville, NC
28134

Opening Hours

Monday 8am - 3pm
Tuesday 8am - 3pm
Wednesday 8am - 3pm
Thursday 8am - 3pm
Friday 8am - 3pm

Telephone

(704) 889-0380

Website

Alerts

Be the first to know and let us send you an email when Carolina Urban Lumber posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Carolina Urban Lumber:

Shortcuts

Share

Category