Grim's Leathercraft & Lasers

Grim's Leathercraft & Lasers Husband to a beautiful & supportive wife, father of two amazing boys, Army veteran, aspiring Leatherworker & Entrepreneur.

A sheath made for a rasp.
12/18/2024

A sheath made for a rasp.

A birthday gift I made for my wife.
08/16/2024

A birthday gift I made for my wife.

After obtaining a stitching pony that appeared to be of good quality, I found that the desk clamp was either faulty or s...
08/12/2024

After obtaining a stitching pony that appeared to be of good quality, I found that the desk clamp was either faulty or subpar. After experimenting with the original sanding and JB welding, I decided to improvise a new shaft to attach it to my panavice, which has worked better than the original. However, I have been disappointed with several of Tandy's products recently, including this one, which has been troublesome since I bought it. Furthermore, the diamond stitching awl's blade broke within 24 hours, necessitating repair with JB weld. Maybe my expectations are too high, but I expect better quality.

I undertook a complex project involving a strap with a damaged handmade brass hook. The hook was attached using old furn...
08/03/2024

I undertook a complex project involving a strap with a damaged handmade brass hook. The hook was attached using old furniture nails. Following numerous trials and thorough research, (and multiple prototype hooks that all shattered ) I managed to craft a replacement brass hook, reproducing the original's appearance and functionality as closely as I could. This project has been a great learning opportunity. You never know what lessons or skills you may need to complete a project. Spending hours pouring over forums and books on metallurgy wasn't something that I thought I'd do with leather work. In the end the feeling of achievement was well worth it.

I created a leather hand grip for this little hand ax, adding a touch of Norse-inspired design. While there is room for ...
07/29/2024

I created a leather hand grip for this little hand ax, adding a touch of Norse-inspired design. While there is room for refinement, I am satisfied with the result.

We are all caught up on orders. If you are interested, these are still available for order.✏️ The third picture is our c...
07/23/2024

We are all caught up on orders.

If you are interested, these are still available for order.
✏️
The third picture is our current color options.
All Ticonderoga #2 pre-sharpened pencils.
Regular yellow are $1 each
Pastel, neon and stripe are $1.50 each
Mix and match however you like. We can engrave whatever you want (name, small quote etc).
🔸️Shipping available for a minimum of $5 (may be more on larger orders)🔸️
Must pre-pay via cashapp venmo or paypal
Venmo: -burke-27
Cashapp: $sherrynicoleburke
Paypal: [email protected]

All paid orders are complete. If you have paid and haven't heard from me,please reach out. If you are interested, these ...
07/06/2024

All paid orders are complete. If you have paid and haven't heard from me,please reach out.
If you are interested, these are still available for order.
✏️
The third picture is our current color options.
All Ticonderoga #2 pre-sharpened pencils.
Regular yellow are $1 each
Pastel, neon and stripe are $1.50 each
Mix and match however you like. We can engrave whatever you want (name, small quote etc).
🔸️Shipping available for a minimum of $5 (may be more on larger orders)🔸️
Must pre-pay via cashapp venmo or paypal
Venmo: -burke-27
Cashapp: $sherrynicoleburke
Paypal: [email protected]

Laser engraved pencils ✏️ The third picture is our current color options.All Ticonderoga #2 pre-sharpened pencils.Regul...
07/03/2024

Laser engraved pencils ✏️
The third picture is our current color options.
All Ticonderoga #2 pre-sharpened pencils.
Regular yellow are $1 each
Pastel, neon and stripe are $1.50 each
Mix and match however you like. We can engrave whatever you want (name, small quote etc).
Must pre-pay via cashapp venmo or paypal
Venmo: -burke-27
Cashapp: $sherrynicoleburke
Paypal: [email protected]

You might remember this project from a while back. After I got my laser engraver I was asked to take it back to put my l...
06/26/2024

You might remember this project from a while back. After I got my laser engraver I was asked to take it back to put my logo on it. So I did... I also cleaned it up, oiled it and sealed it.I added a few extra stitches for strength just for good measure and then put his name on it as a little surprise . I think it turned out really well and I'm glad that that I was able to make something that is benefiting someone and being carried and used daily. There's a unique feeling you give and you can make something by hand that could be sent out into the world and used and help people accomplish whatever goals they set out for that day. To have people rely on the things that you make a hold up to their day-to-day lives. I was trusted with such an opportunity and I feel honored. That's why I will always strive to provide the absolute best product and customer service and care that I am capable of.

I have been looking for inspiration on products and ideas. So I was going to reach out and see if you guys have any idea...
06/24/2024

I have been looking for inspiration on products and ideas. So I was going to reach out and see if you guys have any ideas or things you have collected that you think would be popular, sell or just be fun or challenging to make. I know you guys have some stuff saved on Etsy, Pinterest or screenshots or something that you have tucked away . I'm looking to see what kind of wonderful things y'all have collected and I'm hoping you will share them. I'm always open to new ideas, criticism, and advice. I know that I can't be successful If I limit myself. So I'm always grateful to receive help and counsel from those that have experiences and ideas that I don't. I'm grateful for those individuals that take their time to share their expertise a d wisdom to help me learn and grow. I'm grateful for each and every one of you guys that have supported me and I plan on continuing to learn, grow and evolve and I'm excited to see where this adventure takes me.

Little project for a family friend. Several failed attempts and mishaps but in the end I learned quite a few do's and do...
06/03/2024

Little project for a family friend. Several failed attempts and mishaps but in the end I learned quite a few do's and don'ts for the future. Let me know what you think. I'm off to the next learning opportunity.

Address

McMinnville, TN
37110

Website

Alerts

Be the first to know and let us send you an email when Grim's Leathercraft & Lasers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Grim's Leathercraft & Lasers:

Shortcuts

Share