Hillside Woodworking and Art LLC

07/10/2026

Isn't she pretty?! 😍 Very happy with how it came out. 😊 (The butterfly is woodburned 🦋)

06/24/2026

One of the focal points of this dresser is the turned legs. The 1st collage is of the steps of making them. Once I turned them, I screwed a piece of wood to the square parts I left unturned and ran them through the table saw with a stacked dado set a few times to create a 90° inside corner, then finished the bottom by hand with a chisel. The second collage is where everything is at currently. I have 2 coats of primer on the dresser carcass (which will have white paint and gray stain) and I got the dovetailed drawer boxes made. Tomorrow I will sand them, fit them, and put finish on them. :)

06/10/2026

Progress 😊 next up is turning legs on the lathe and making drawers ✅️ Top is also glued up. Everything will be finished a vintage white. 🤍

05/29/2026

Just realized I never posted pictures of other projects I did somewhat recently, installed 🤦‍♀️😍 Very happy with how these came out 😊

05/29/2026

Fit like a glove 🤗😍

05/28/2026

Quilted Cherry dog gate/door 😍✅️

05/10/2026

Happy Mother's Day!! ❤️

Being a mother is the best job in the world...so blessed to have these two call me Mama! 💓

05/06/2026

Chairs ✅️ Aren't they pretty?! 😍

04/24/2026

How I "carved" the seats for the chairs. I took out most of the material with a dado blade setup on the table saw with a small 1/4" thick piece of wood carpet taped to the center of the front of the seat so it was angled. Make sure to mark a stop line on your fence. Then used a 60 grit flap wheel on the grinder to blend everything out. (1st video is of starting that process) Continued to shape with all the grits of sandpaper with my orbital sander and routed a round over on all edges. Last video is all of the seats done. 😊