Aric Alcantara

Aric Alcantara Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Aric Alcantara, Furniture, Bend, OR.

A flashback to this really cool picture frame I made for some awesome friends. Made with walnut and finished with Odie's...
02/04/2019

A flashback to this really cool picture frame I made for some awesome friends. Made with walnut and finished with Odie's Oil. P.C @ Bend, Oregon

This coffee table is just about ready for finish! Got it sanded to 400 grit, now I am just waiting for the dust to settl...
02/01/2019

This coffee table is just about ready for finish! Got it sanded to 400 grit, now I am just waiting for the dust to settle (literally) in my shop. Tomorrow I will come back and thoroughly wipe this down to prep it for some Odie's Oil! Hit the follow button if you wanna see the finish video! @ Bend, Oregon

After a rough 80 grit sand, I go back and fill all the little chips or holes that got revealed after flattening. This cu...
01/31/2019

After a rough 80 grit sand, I go back and fill all the little chips or holes that got revealed after flattening. This cures for another 24 hours, and then I can finish sand!

Ladies and Gentlemen, I present to you the first ever Sawdust River Table! πŸ˜‚πŸ˜‚πŸ˜‚
11/28/2018

Ladies and Gentlemen, I present to you the first ever Sawdust River Table! πŸ˜‚πŸ˜‚πŸ˜‚

Here’s what $1100 of  looks like! Thank you Mike from  for hooking me up!
11/27/2018

Here’s what $1100 of looks like! Thank you Mike from for hooking me up!

Cyber Sunday has a better ring to it than cyber Monday. So for Cyber Sunday I am offering to make a table out of this in...
11/25/2018

Cyber Sunday has a better ring to it than cyber Monday. So for Cyber Sunday I am offering to make a table out of this incredible walnut slab for $2000 off! This could be made into a table up to 10’ long. It is approximately 43” wide. I could fill the voids with any color epoxy you like, including a black epoxy if you don’t like the color. We can throw any type of steel or wood legs you like on there as well. Send me a DM For a quote!

Throwing it back to this awesome table I made a few months back.
11/25/2018

Throwing it back to this awesome table I made a few months back.

11/21/2018

For this conference table, I will be cutting it in half down the middle in order for it to fit in an elevator. It is getting delivered to a company in San Fransisco and will be on the 5th floor. After going through the elevator, it will need to be reassembled using the domino connectors. A few people have expressed concern about the seam and how visible it would be. Here is a video demonstrating how tight a seam is with the Festool Track Saw. This is for a cut off, and there has been absolutely no reworking, sanding, or planing. I love my new tools!! 😎πŸ’ͺπŸ‘Œ

Check out this awesome piece of Monkey Pod from !! Huge thanks for such a beautiful slab. This is getting made into a 9’...
11/21/2018

Check out this awesome piece of Monkey Pod from !! Huge thanks for such a beautiful slab. This is getting made into a 9’ conference river table. Big shout out to for the ts75 tracksaw that made quick work cutting this bad boy down to size. What color would you make this river if it were your table??

A couple people have asked what kind of legs are going on the conference table. Here they are in mid progress! We are go...
11/21/2018

A couple people have asked what kind of legs are going on the conference table. Here they are in mid progress! We are going to have TWO of these bad boys! They are getting powder coated black. Check out to see the progress on this and other awesome pieces of art he has made! Thanks Roger!

Finished photos of the two  inspired chairs. I’m glad we get to keep these ones. Nothing more satisfying than putting a ...
11/18/2018

Finished photos of the two inspired chairs. I’m glad we get to keep these ones. Nothing more satisfying than putting a whole bunch of effort into something you can sit and kick your feet up on. Finished with nothing other than ! Would you put these chairs in your house? @ Bend, Oregon

One down, one to go! Finished with . This is  original design!
11/18/2018

One down, one to go! Finished with . This is original design!

Address

Bend, OR
97701, 97702, 97703, 97707–97709

Website

Alerts

Be the first to know and let us send you an email when Aric Alcantara posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Aric Alcantara:

Share

Category