Carv

Creatieve houtbewerking waarbij ambacht, design en technologie naadloos in elkaar overgaan.

15/09/2021

Net een leuk custom project voor ErgoCoach.be mogen opleveren.

Leuke uitdaging om zowel functioneel als esthetisch creatief te mogen zijn bij de invulling van deze bestelwagen die dienst zal doen als mobiele toonzaal / kantoor / ...

Het podium met daarboven flowsleeping bed is zo opgesteld dat bij de instructie de klanten van dichtbij kunnen zien hoe de mechanismes werken. De geïntegreerde led strip zorgt voor wat sfeerlicht en de lange module onderaan zorgt voor extra opslagruimte.

Problemen met slapen / slechte werkhouding en geen zin om je te verplaatsen? Laat .be zeker eens langskomen!

01/09/2021

Here's our latest and greatest build so far. We made this custom VW t2 photo booth for from scratch.

The goal was to do things differently compared to standard photo booths. We wanted to create the perfect mix of design and functionality.

The left hand side of the main enclosure is mostly square while the right hand side contrasts this with gentle art deco inspired curves to soften the overall aesthetics and create an interesting piece. We raised the module up from the ground to make appear lighter and give it a homely feeling.

We got to try a few new techniques which allowed us to use bent plywood, laminate plexiglass in between wood layers, use magnets for clever invisible wire management, custom LED light effects by Walravens Bert 😍 ...

I think this one will definitely serve as a guide for more projects to come. What do you think?

16/06/2021

Finally some time to post this amazing house themed clothing rack we built for .be.

It's made entirely out of baltic birch plywood and is held together by a grand total of 0 screws. That's right zero! It's a big puzzle so it can easily be taken apart shipped in a smaller form and after unpacking it can be put together in about 2 minutes. Not to bad right? For finish we just applied to keep everything as natural as possible

If you have kids running around the house you should definitely go and check out the shop and let us know what you think about the rack.

Design and production by us!

10/05/2021

Even though we cut our furniture with José (our cnc) this doesn't mean things just pop out of nowhere. Here's a behind the scenes look into how we designed a standing table resembling a hoogspanningsmast 😉 for Eneco from scratch. After the design is done it needs to be translated into code that the cnc understands with the correct settings for speed, depth of cut, rpm, ... . When that's done you get your cutouts and the sanding, gluing and finishing can begin!

26/04/2021

Our very first Outdoor project is taking shape nicely.

We're stepping away from traditional swings and playhouses that can be used for just a few years. Instead we're moving towards something that's more future proof and can grow with the family for many years to come.

From a basic swingset and playhouse it will evolve to be a little man's cabin where learning and experenting wil be stimulated and summer nights sleepovers can be held with friends.

The structure needed to be accessible from various levels and angles so there's many "game flow" options to allow for maxim creativity.
Hence the hidden door in the floor, acces to an outside deck connecting to a deck, slide.

Adults should also be able to use it to play with kids and take advantage of the shape and strength for outdoor home workouts.

Really looking forward to the next steps in this amazing project!

07/11/2020

Yay project complete! 🎉🎉

We turned an old Oak mantelpiece into this lovely herringbone coffee table and set it up for a few years of extra service instead of letting it go to the scrapyard!

This was also a concept test for the bigger build around the corner. We'll be scaling it up to a dining table next!

05/11/2020

R&D is so important to us that we opened a special testing facility for our products.

Here you can see Sam strength testing the coffee table frame after the glue up.

&d

04/11/2020

My nephew found 2 heavy old pieces of wood and dropped them off earlier this week. Apparently they used to be a mantelpiece and made of solid white oak.

Perfect material for a furniture project so we're transforming it into a coffee table.

In the pictures you can see the change from solid worn beam to 4 beautiful tapered legs going from square to round.

Stay tuned for the rest of the build!!

PS: If you're in flanders and need an electrician you can really really count on?? 1 address 💡

🇧🇪

Adres

Broekstraat
Dilbeek

Telefoon

+32477711977

Website

http://carv.be/

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer Carv nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.