Timber and Ply Custom Woodworks LLC

04/11/2026

Today marks completion of my biggest project to date. 12 bookcases, a live edge storage bench, and remote on/off lighting for the 11 vertical bookcases. Coming in at 34 sheets of plywood, 200 board feet of 3/4" thick hard maple, plus the 2 inch thick live edge slab this project was the result of 3 months of nights and weekends (mostly enjoyable) work. Some lessons learned along the way, mainly to do with design choices and building into a non square room. The customer and I are both quite pleased with the final product.

03/10/2026

A little sneak peak before delivery. The storage bench for the library project. 3 drawers, and a live edge slab top make this one of the coolest pieces I've made to date. There is a 6 inch wide piece of trim that goes under the drawers, to be put in place during installation, after the leveling feet are all put to the proper height for the not always level floor.

03/01/2026

I dont have a cleaner picture, but I just got back from delivering this dollhouse inspired bookcase to a customer! The scalloped trim was done on a friend's cnc router, everything else in my shop as per usual.

02/07/2026

Phase 1 of the library build is coming along nicely!
Next weekend I will add some maple trim, then we are on to phase 2.

01/26/2026

The current project calls for built in lighting. Here is a preview of the first bookcase sans shelves in the dark!

01/12/2026

A bit late on uploading after a busy holiday season, but here is the finished mud closet installation.

11/20/2025

New tool research time.
Kicking around the idea of a full time production shop. Tonight's rabbit hole has brought me to the conclusion that a Giant CNC Router that cost more than my first 3 vehicles combined is obviously the route to go, should we pursue the notion of full time custom cabinetry maker.

Send a message to learn more

11/15/2025

Today's design is for a large end table. With a nearly 2" thick top and base measuring 30 x 30, 24 x 18 respectively, and a nearly 6" thick carved twisted leg. This piece will require learning a new skill, power carving in order to get the twisted curvature geometry as modeled. Personally, I feel this piece would look great made from 8/4 Spalted Maple, but any domestic hardwood available in 8/4 would be suitable for this build. If you are interested in commissioning this build please get in contact for a quote with your ideal material.

11/09/2025

Finally installed the Salon Cabinets that have been in progress for a few months now!

10/23/2025

Exciting news for Timber and Ply. I picked up 2 new commission builds over the past week. First up is converting a closet to a mudroom built in. 2nd is my biggest build so far, by a long shot. Converting a sitting room in the customers house into a library with storage bench. I am quite looking forward to both builds.

10/09/2025

Here we have one of the salon cabinets mocked up with drawer fronts and doors near their final position. Please excuse the garage Pic and blue tape!

10/06/2025

Frame one mitered glue up strapped up and drying! Please excuse the cluttered garage!