Balz Custom Design

07/30/2022

07/30/2022

06/16/2016

03/04/2016

New Queen size bad frame

08/23/2015

One and only custom baseball bat shelf! Hand carved huge bats, and real bats are used for the supports down the middle. This piece is made by Joe Drexler. For more info please contact Joe or myself.

01/14/2015

The octagon pub table is approximately 3 1/2 ft in diameter and stands 43 inches tall. The wood used for this project was knotty pine, and the very bottom of the base is doug fir 4 x 4 post. The frame of the table is made of 2x4's. This one hasn't been sanded, stained or clear coated as of yet but once it has been I think it will be a few shades darker. Hope you like it!

01/14/2015

Here is the pub table!

01/04/2015

Some new deck coolers have just been finished! Check em' out and see if you like the design. There are a ton of possibilities with them. There is also a Pub Table that is almost complete and I'll be posting pics soon!

01/02/2015

The coolers inside dimensions are 16" X 24" and 16" deep -- plenty of room for a few 30 packs, or whatever you would like to put in them. On the outside, they measure approximately 23" X 30" and stand 37 1/2" to the top of the door. They can be made to any size or height. There is 1 1/2" Styrofoam surrounding the metal for insulation to help keep beverages cool. There is also a 1 1/2" drain in the center so once all the ice melts you don't have to try and flip the entire cooler over to let the water out because these are pretty heavy. Made from Doug Fir 4 x 4 posts for the legs, 3/4" Oak plywood for the side panels and door, and the trim which the door rests on is 3/4" solid Maple. If interested, please contact me. Hope you enjoy! Oh yea, and these were completed with Green Bay Packer k***s, I used 3 1/2" chest handles and a bottle opener. More can be added with burning/etching/engraving/routing depending on the wood chosen.

08/08/2014

Brand new old looking chest! approx. 12" X 16" and 17" high (to the top of the lid)...Actual strap steel was used for the front, top, and back, with metal chest handles and a chest 'lockable latch'...not shown in the pictures is the 3inch heavy duty hinges, they are the same color as the latch on the front!