Cabinet Solutions Design Software, LLC.

05/18/2026

Thank you for helping make our first live stream a success this weekend!

I will definitely set up more in the future and will hope to keep improving them as I make more and more. I am also going to be adding them to the cabinetsolutions.net website on the videos page for anyone to go back and watch them again in the future. I know your time is important and again, I thank everyone who shared their time with me this weekend. I will be creating more events like that in the future and will notify through email and also on this page. Keep an eye out for future events!

And if you have any ideas on what you'd like to see in the future, please drop a comment here, or on email and I will look into adding them in future sessions.

- Jake

Cabinet Solutions Kitchen Cabinet Design Software with 3d, CNC Exporting, Job Costing, Cut List, Panel Optimization and more.

05/16/2026

We are LIVE! Come check out the Cabinet Solutions First Q/A Live Stream!

Welcome to Cabinet Solutions first Live Stream! I will be building kitchens from images I have found on the internet and taking questions that you may have a...

05/15/2026

Here's the corrected link to the live event tomorrow. I'm sorry for any inconvenience this may have caused.

https://youtube.com/live/pR-EuJ14T5w?feature=share

The event post itself has also the new corrected link. I hope to see you then!

Welcome to Cabinet Solutions first Live Stream! I will be building kitchens from images I have found on the internet and taking questions that you may have a...

05/11/2026

For anyone interested in the Livestream, I'm not able to modify the original Facebook event as far as I can tell but if it doesn't show, here's the link to the stream. See you Saturday!

Cabinet Solutions Questions and Answers session!This is the first Cabinet Solutions live stream where I will build a job or 2 while answering any questions t...

04/24/2026

I am extremely excited! So far I feel like I have enough feedback to start this livestream. If I see there's enough people interested, I may even turn this into an every month or 2 event.

Please feel free to share the event with anyone you feel may be interested in it. Will post more about it next week.

Thank you!!

Send a message to learn more

04/24/2026

I'm thinking about setting up a live stream of me creating a job in Cabinet Solutions and am curious if there would be any one interested in seeing that? It would be also answering questions and possible tips/tricks. If I see that there's enough of a response, it would be on a Saturday and I would block off about 2 hours as to not take up too much time on hopefully, a day of rest for everyone.

Most likely it would be done in the way that I learned how to use Cabinet Solutions. When I started, I was given a kitchen out of a magazine and told that I didn't have any measurements so I would have to eyeball it but to draw that kitchen in our software to the best of my ability. It was fun and I learned so much from it.

So what I would do for this live stream is pick out a kitchen or 2 from the internet, and chat away while laying it out and designing it in Cabinet Solutions.

Let me know in the comments if this is something that anyone would be interested in and will see what happens!

- Jake (Not from State Farm :) )

Send a message to learn more

04/22/2026

We're still creating videos!

A new video has just been added to our website and YouTube channel. The video is 'How to set a single door to cover multiple openings" and goes over using a single door to cover 2 openings and still keep the center rail behind it.

The same steps it goes through applies to both Face Frame and Euro style cabinets. Please give it a view and see what you think. Got any ideas for future videos? Please drop a comment here, send us an email to [email protected] or give Cabinet Solutions a call at +1-209-836-4077.

Thank you!

How to Set a Single Door to Cover Multiple Openings

12/10/2025

Announcement for Cabinet Solutions Customers below. Legacy customers, please keep an eye on your email for future announcements:

12/10/2025

We appreciate and thank you for being a Cabinet Solutions Design Software customer.

As we are sure you have seen, prices everywhere are increasing, and we have absorbed many increases placed on us over this last year.

To continue to give you the best service we can, we have adjusted our price slightly.

Price adjustments:

For 30 days use, as of 1/1/2026: $110 per month.
For Yearly membership, as of 1/1/2026: $600.00
No Change for extra licenses, (Still $50.00 each)

CNC Workshop Package is now included in both price points.

We have noticed that more and more customers lately have been turning to CNC for cutting out cabinet parts. To help out, we have decided that as of 1/1/2026 Cabinet Solutions will be showing only one program package on our site.

That package will include our new CNC Workshop. If you don't currently have a CNC you will not have to use it & nothing will change. However, if you obtain a CNC machine, our web site at cabinetsolutions.net will have a video for CNC setup or you can contact our Technical Support (FREE) at 209-836-4077 for help in getting started.

We will do our best to continue providing Cabinet Solutions Design Software at a reasonable price.

Thank you again for being a Cabinet Solutions Customer.

We look forward to serving you for many years to come.

Regards.
Cabinet Solutions Software Team

Cabinet Solutions Kitchen Cabinet Design Software with 3d, CNC Exporting, Job Costing, Cut List, Panel Optimization and more.

05/23/2025

Cabinet Solutions will be closed on Monday, May 26th for Memorial Day. We will be back in the office on Tuesday May 27th at our normal office hours.

01/17/2025

Cabinet Solutions will be closed on Monday, January 20th for the Dr. Martin Luther King Jr. Holiday and will be back on Tuesday, January 21st at our normal office hours.

12/27/2024

Cabinet Solutions is currently open daily and will be closed only on New Years Day for the Federal Holiday.