PS Petrotech Co,Ltd

13/12/2019

The LPC range of Limitorque Pneumatic Actuators is a robust, lightweight modular Scotch yoke design, available in both spring return and double acting configurations. The LPC product range is complementary to the already available range of Limitorque LPS heavy-duty pneumatic Scotch yoke actuators. A similar design philosophy to the heavy-duty LPS was applied to the new LPC range, delivering enhanced performance and high reliability. The LPC is available in a selection of standard as well as special materials, upon request.

If you have any queries, Please do not hesitate to contact us.

Tel : +662-965-6380-4
E-mail : [email protected]

20/11/2019

SWITCH BOXES - DS/DM
The DS/DM Ultraswitch provides reliable position signaling for the highest class IIC/Group A hazardous location areas. Available with aluminum or stainless steel enclosure for chemical, oil and gas, pharmaceutical and offshore applications. Available through the PMV, Accord, Automax and Worcester product lines from Flowserve.

Features and Benefits
• Features aluminum or corrosion resistant stainless steel housings
• Meets IP66 and NEMA Type 4X standards and is offered for general purpose, weatherproof and IIC/Group A explosion-proof hazardous locations
• Highly configurable, with numerous options for switches, housing materials and terminals, among many others
• Up to 4 switches, 3 conduit entries, external visual indicator and position transmitter available

If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]

14/11/2019

14/11/2019

What is PSCoat?
- unique modern nanotechnology insulation material
- based on closed porous spherical fillers Microspheres
- replacement of polystyrene and mineral wool
- minimise heat transfer between surfaces
- with thin layer of application 1-5 mm
- saves space and weight, easy to apply everywhere
- no special team needed for implementation – just spray or paint
- allows spot repair and permanent eye-control of surface

PSCoat can be applied directly onto the hot surface – without stop operation (till 150 C) You will always have visual contact with the surface – easy spot repair.
Easy apply in curves, valves, difficult accecible places. Ecological friendly

If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]

29/10/2019

Gauge body of this type is formed of a trapezoid in its cross sectional view so as to form a prism when a clear liquid comes in contact with opposing two glasses. With this devising and with the aid of an illuminator installed at the rear of the gauge to provide with red and green lights, level of the liquid can be clearly recognized by the boundary of the two colors, that comes up with the difference of refraction caused by existence or non-existence of the liquid. Since the gauge of this type is functional only with clear, transparent gas and liquid, it is mostly used for boiler applications which are worked with water and steam.

If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]

21/10/2019

Intrinsically safe and non-incendive, the PS/PM features a lightweight, modular design with corrosion-resistant engineered resin enclosure. It is ideal for chemical, petrochemical, municipal, wastewater and pharmaceutical applications. Available through the PMV, Accord, Automax and Worcester product lines from Flowserve.
If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]

08/10/2019

The V series ductile iron housing provides strength and durability. The drive sleeve, bevel pinion shaft, and spur gear reduction shafts are roller bearing-supported, delivering high mechanical advantage and long life. Excellent sealing of mating surfaces provides reliable environmental protection. Ambient temperatures to -40°C are achieved with the standard lubricant.

If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]

20/09/2019

Norbro was the first manufacturer to utilize support rods within the actuator. This ensures that any side loads generated by the pistons are transmitted through bearings in the end cap and not the body. Therefore the bore of the body is only used as a sealing surface and not the bearing surface, hence increasing the life of the actuator. This feature distinguishes the Norbro actuator from the standard rack and pinion design providing reliability, long life and high performance.

If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]

09/09/2019

LPS Limitorque Pneumatic Heavy-Duty Scotch Yoke Actuators

LPS actuators provide up to 300 kNm (221 270 ft-lb) of heavy-duty torque. Enhanced performance is achieved by using a superior scotch yoke support design that significantly reduces transverse loads. LPS actuators feature modular construction to minimize repair time and initial cost while maximizing process availability.

If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]

09/09/2019

The photo gallery of Flowserve Automation Products held up by P. S. Petrochemical Co., Ltd. joined with Flowserve Corporation since 21-22 August 2562
We would like to thank you all of participants for your trust in attending this seminar

05/07/2019

The Flowserve Limitorque WG series of worm gearboxes is designed for quarter-turn butterfly, ball, and plug valve applications as well as quarter-turn and multi-turn dampers and offers unsurpassed quality and longevity in a wide variety of weatherproof, submersible and buried-service applications.

Features & Benefits
- Extraordinary range of output speeds and torques made possible by compatibility with a wide array of numerous electric actuators
- Weatherproof, temporary submersion, and buried services
- Features self locking gearing
- Quarter-turn or multi-turn, manual or motorized operation available
- -300C to 900C ambient temperature range
- Reduced downtime provided by the removable, top-entry, splined valve shaft adapter, which ensures proper engagement of the valve stem
- Increased uptime due to rugged ductile iron housing, roller bearing-supported shaft and well-designed sealing, which stands up to tough conditions
If you have any queries, Please do not hesitate to contact us.
Tel : +662-965-6380-4
E-mail : [email protected]