RvW

RvW Contactgegevens, kaart en routebeschrijving, contactformulier, openingstijden, diensten, beoordelingen, foto's, video's en aankondigingen van RvW, Garderen.

• Citymap Garderen •Speciaal voor een klant een op maat gemaakt bord van Garderen. Uiteraard zijn andere gebieden, dorpe...
02/02/2024

• Citymap Garderen •

Speciaal voor een klant een op maat gemaakt bord van Garderen. Uiteraard zijn andere gebieden, dorpen of steden ook mogelijk! Doe een dm als je ook een leuk wandbord wil met een plaats erop gegraveerd!

• eigen project •Wijnflessen wandmeubel gemaakt van berken, hexagonvormige opberg vakken. Afgelakt met 2 componenten hes...
14/01/2023

• eigen project •

Wijnflessen wandmeubel gemaakt van berken, hexagonvormige opberg vakken. Afgelakt met 2 componenten hessen lak 💎🍷

• bruiloft opdracht •Voor L&L een gaaf welkomstbord gemaakt voor in de tuin 🌿💍
12/09/2022

• bruiloft opdracht •

Voor L&L een gaaf welkomstbord gemaakt voor in de tuin 🌿💍

• personal project •I made myself a dining table from ash wood. The wood was first planed to width and thickness, then g...
08/08/2022

• personal project •

I made myself a dining table from ash wood. The wood was first planed to width and thickness, then glued to a table top. Finished with rubio monocoat cotton white.

I repainted the x legs with black high-gloss lacquer, the legs were first affected by rust. This way the legs get a new purpose. ♻️

# #

• Harp - part 8 •All parts are complete. These are now attached to each other. The harp is being prepared for finishing....
02/07/2022

• Harp - part 8 •

All parts are complete. These are now attached to each other. The harp is being prepared for finishing. First 3 layers of primer, then 2 layers of black lacquer, as top layer a transparent yacht lacquer.

All the fittings for the strings can be mounted in the pre-machined holes. This is where the strings come in.

• Harp - part 6 •The only missing part is the neck of the harp. It is made of birch plywood, glued in two layers. The ho...
17/03/2022

• Harp - part 6 •

The only missing part is the neck of the harp. It is made of birch plywood, glued in two layers. The holes are drilled with the CNC machine, the head is shaped by hand.

• Little present for a little boy 🤍 •
05/01/2022

• Little present for a little boy 🤍 •

• Harp - part 5 •At school I could use the CNC machine for making the pilar of the harp. I needed a milling machine that...
25/10/2021

• Harp - part 5 •

At school I could use the CNC machine for making the pilar of the harp. I needed a milling machine that could do 5 or at least 4-axis milling work. While milling this shape I had prepared the hole for the “peg en hole” connection. That safed me a lot of time, otherwise I had to do it by hand.

• Harp - part 4 •The next thing I did was making the foot of the harp. I designed a shape and had the CNC machine cut it...
08/10/2021

• Harp - part 4 •

The next thing I did was making the foot of the harp. I designed a shape and had the CNC machine cut it out. Time to let the glue do its work. A little bit of sanding, and done!

• Harp - part 3 •We move on to creating the sound board. This must fit in the body of the harp. Later the strings will a...
11/09/2021

• Harp - part 3 •

We move on to creating the sound board. This must fit in the body of the harp. Later the strings will also have to be attached to this soundboard. The soundboard tapers upwards and also to the sides. This is for a better resonance when the string starts vibrating during playtime.

• Harp - part 2 •This second part is all about creating the body. The shape, the holes in the back of the body and the a...
04/09/2021

• Harp - part 2 •

This second part is all about creating the body. The shape, the holes in the back of the body and the angle of the top and bottom.

Festool Pica-Marker

• Harp - part 1 •A year ago I started building my own instrument at HMC college in Rotterdam. I'll post all the photos o...
13/07/2021

• Harp - part 1 •

A year ago I started building my own instrument at HMC college in Rotterdam. I'll post all the photos of the process. Starting with a design phase. Followed by a drawing in autocad. Then composing a string scheme and so on.

Adres

Garderen

Website

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer RvW nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Snelkoppelingen

Delen