https://www.facebook.com/118086079600433/

Second Hand Furniture and Household Goods- Preston, Preston (2026)

19/01/2026

✨ Engraved 'Trumpet' Vase — Brass Tone, Full Floral Scrollwork

Bring instant boutique-hotel “wow” to any room with this tall, sculptural floor vase featuring all-over floral arabesque engraving and a luxe antique brass finish. The flared trumpet rim and heavy-looking pedestal base make it a perfect entryway / fireplace / corner statement piece.

Why its great 👇

🌟 True statement scale: tall floor-standing silhouette that visually “finishes” a room (great for blank corners & hallways).

🌺 All-over engraved detailing: dense floral scrollwork with textured hatch lines that catches light beautifully

🏛️ Classic Indo-Persian décor vibe: the motif and engraving style matches widely exported brassware traditions (often associated with Moradabad-style brass/metal engraving).

🥂 Glam-meets-boho finish: matte antique brass tone that pairs with modern neutrals, maximalist interiors, and “heritage luxe” styling.

🌾 Style it your way: ideal for pampas grass, dried palms, faux stems — and if you want fresh flowers, just pop a slim liner inside.

Care & upkeep🧼

🧽 Gentle cleaning recommended: warm, mild soapy water + a soft cloth; dry immediately to protect the finish.

🚫 Avoid abrasives (harsh scrubs/powders) to prevent scratching or dulling.

Condition 🔍

✅ Engraving crisp and consistent across body and base

✅ No dents or rim damage

✨ Clean, high-impact décor piece

Perfect for… 🏠

🛋️ Living room corners / beside TV units / reading nooks

🔥 Fireplace styling

🏡 Home staging / Airbnb “upgrade” piece

🎁 Housewarming gift for décor lovers

For £120

🏺 , , , , , , , -Persian, , ,

15/01/2026

☕ Coffetek / Azkoyen Vitro Internal Keypad + Control PCB (Service Programming Set)

Bring a Coffetek Vitro back from “out of service” to fully programmable in minutes. This listing is for the internal service keypad membrane + matching interface PCB (as pictured) — the exact setup used by operators/engineers for PROG / FLUSH / ENTER / ESC navigation, diagnostics and maintenance routines.

✅ What’s included:

🖲️ Internal membrane keypad overlay with printed legends (ESC / ENTER / PROG / FLUSH + arrow keys + ★) and flat ribbon tail (photo shows intact tail)

🪟 Integrated LCD viewing window (clear window cut-out for the internal display)

🧠 Interface / display PCB with multiple harness headers + board marking “v0-079797-01E” visible on the rear, plus “TEST OK” sticker (factory QC indicator)

🚀 Why this part matters:

🧰 Access operator/service menus — the Vitro manuals specifically use this keypad for programming navigation (ENTER/ESC/PROG + arrows + ★).

🚿 Run FLUSH cycles properly — Vitro procedures call for pressing FLUSH on the internal keypad to initiate cleaning/flush routines.

🔁 Quick reset & recovery — operator guidance includes entering/exiting programming via PROG when the machine is out of service.

🔧 Compatibility:

✅ Coffetek / Azkoyen Vitro range that uses the internal keypad layout shown (PROG/FLUSH/ESC/ENTER with arrows + ★). Manuals for Vitro ranges document this exact internal keypad function set.

📦 Perfect for:

🏪 Vending operators reducing downtime (swap and restore controls fast)

🛠️ Refurb / repair techs rebuilding Vitro machines for resale

🧪 Workshop spares for quick diagnosis + service access without delays

🔎 Get it for £170

, , ,

15/01/2026

🚀 Coffetek Vitro / Gourmet Main Control Board (Logic PCB) + LCD Module – OEM (2017)

The brain of the machine. Ideal for engineers, refurbishers & operators who want a fast fix without paying “new board” prices.

🔧 What you’re buying:
🧠 Main Control / Logic PCB (Motherboard) – handles full machine operation (heating, vend logic, motors, valves, safety)
🖥️ Blue backlit LCD module PCB – character display board shown (great for service/diagnostic interface)
🔌 Multi-harness connectors – for valves, heaters, motors/augers, UI panels & looms
🏭 Genuine Coffetek OEM – QC sticker dated 2017 + board markings (not aftermarket)

🧾 Photo-confirmed identifiers:

🔋 CR2430H 3V lithium backup battery fitted (RTC / memory retention)
⚡ Heavy-duty switched outputs via multiple power devices/heatsinks (for heaters, motors, pumps, solenoids)
🏷️ Coffetek QC label: “2017” + Serial No. (visible on board)
🧬 Board marking: “Z14CU … GAB3 REV2” (printed on PCB edge)

☕ What this board does:
🎛️ Controls drink selection logic (the whole vend sequence)
💧 Drives solenoid valves + water routing (the same type of system used across Vitro platforms)
🔥 Manages boiler/heater cycles + safety cut-outs
💳 Interfaces with payment systems (MDB / peripheral connections depend on machine setup)
🧊 Reads sensors (temperature, door/logic interlocks, service states)

✅ Compatibility:
🏪 Commonly used across Coffetek Vitro / Gourmet families (mid-2010s era)
🔁 Often swapped/refurbished in the field (firmware + loom/connector match is the key)

💷 Why this is a smart buy:
💸 New control boards are expensive — trade suppliers list genuine Coffetek control boards and variants at hundreds of pounds depending on model/spec
🧰 Perfect for engineers & refurbishers keeping deployed machines alive (downtime costs more than parts)

🧪 Condition:
✅ Clean board, no burn marks or blown components
🔧 Battery present (CR2430 format is a standard 3V coin cell type used for memory/clock retention)
📸 Sold exactly as shown (please use photos to confirm connectors/fitment)

🧷 Best for: vending engineers • refurb shops • operators • parts resellers

🔎 , , , , ,

🧩 Need a matching UI/display? It's yours for £250

15/01/2026

Coffetek Vitro Selection Panel / User Interface Assembly (ASKOYEN) – Illuminated Fascia + PCB + Ribbon – 2017

⚡What it is:
✅ This is the complete, integrated front-door selection UI.
Built for Coffetek Vitro machines, featuring the ASKOYEN DS-205 PCB, factory connectors, ribbon interface, and the illuminated drink fascia.

✅ What You’re Buying (Complete Assembly)
🧠 ASKOYEN low-voltage UI PCB (button sensing + LED/backlight control)
🔥 DS-205 / 94V-0 board standard (vending-grade safety spec)
🔌 Factory ribbon/plug connectors (JP headers visible)
💡 Illuminated drink selection fascia:
🔥 Hot Water
🥛 Latte Macchiato
🍫 Mocha
🍫 Chocolate (x2 selections)
🧩 Plastic mounting carrier frame (correct clips/spacing for Vitro door fitment)

🏷️ Visible IDs / Markings:
🏰 ASKOYEN branded PCB (rear)
📟 DS-205 / 94V-0 / RoHS markings
🧾 Board label: “43316110-3” + AZK identifier
📅 Coffetek sticker 2017 (date wheel)

🔧 Compatibility:
✅ Commonly used across Coffetek Vitro S / Vitro X door selection systems (varies by lane/button layout)
🛠️ These parts are typically sold as complete door selection panels in the spares market (often ~£100+ depending on variant), so intact assemblies are sought-after

🧾 Condition:
✅ PCB clean
✅ Connectors & ribbon interface intact
✅ Legends readable
⚠️ Cosmetic wear consistent with commercial service use

🎯 Ideal For
👨‍🔧 Vending engineers / field technicians (fast swap, minimal downtime)
🏭 Refurbishers & operators rebuilding Vitro doors
🧩 Repairing dead buttons / dim backlights / failed UI boards without replacing a whole door assembly

Price - £140

15/01/2026

☕ Coffetek Vitro 6 (Gourmet) Complete Drink Selection Button Panel / UI Assembly – 5 Backlit Icons + PCB (2017)

Give your Vitro 6 a factory-correct front interface again — this is the complete user-selection panel assembly, not just a sticker fascia. Ideal for refurb, repairs, and keeping revenue machines earning.

✅ What’s Included:
💡 5x illuminated drink icon modules: Espresso / Black Coffee / Café Latte / Café au Lait / Cappuccino
🧠 Rear control PCB (button/LED driver board)
🧷 Ribbon cable connector (flat flex loom connection present)
🧱 Original Coffetek plastic carrier frame

🔧 Why this part matters:
🛠️ Model-specific UI hardware — Vitro-series panels/boards are not universal, so a complete matching set saves time vs. piecing parts together
💶 High-failure, high-demand service part — these get damaged by liquid ingress + heavy daily use, and OEM replacements aren’t cheap
✨ User-friendly, icon-led selection — Coffetek/Vitro machines are built around simple icon-driven drink choice and “in-touch” style selection that’s quick for end users

🧾 Photo-confirmed technical details:
🗓️ Coffetek service sticker: 2017
🧯 PCB safety marking: UL 94V-0 (flame-retardant PCB material rating)
🏭 UL file marking: E93995 (printed on board; traceable to UL documentation)
♻️ RoHS marked (shown on PCB)

👷 Best for:
🧰 Vending engineers & field techs (swap-and-go repair)
🔁 Refurbishers / operators keeping older Vitro 6 machines working
🏢 Sites with existing Vitro menus that need matching icons (your set is complete)

📌 Condition notes:
🔍 Visually intact & complete assembly
⚡ Tested and working

📦 Packaged carefully for electronics - for £120

15/01/2026

☕️✅ Set of 4 A.u.K. Müller Dispense Solenoid Valves — Typ 46.008.111 (24V DC / DN8 / 9.5W)

Upgrade a tired vending machine, fix inconsistent pours, or stock your spares shelf properly — this is a matching set of four OEM-grade beverage dispense valves from A.u.K. Müller (Düsseldorf, Germany), a premium supplier used across commercial hot-drink systems.

🔥 Why these are the right valves:
🏭 OEM beverage dispense valve — Series 46.008.111, purpose-built for hot/cold drink dispensers (not random pneumatics)
🚰 2/2-way, normally closed (NC), direct acting — opens reliably even from zero pressure (ideal for low-pressure vending circuits)
🧼 Lime-repellent PTFE valve seat — designed to inhibit scale build-up (huge in coffee/hot water systems)
🎛️ Flow adjustable — built-in regulation for tuning dispense volumes/flow
💧 Complete drain-down after shut-off — vented outlet/nozzle design helps avoid drips & stagnant water in downstream tubing

⚙️ Technical Details:
⚡ 24V DC, 9.5W (100% duty cycle on DC)
📏 DN 8 nominal diameter
🧪 Pressure range: 0–60 mbar (low-pressure dispense circuits)
🌡️ Max fluid temp: 98°C / Max ambient: 70°C
🔌 6.3 × 0.8mm spade terminals
🧱 Materials: PSU body + PTFE seat + stainless internals (food/hot-water appropriate design)

✅ Compatibility:
🥤 Perfect for vending / bean-to-cup / instant drink systems where low-pressure hot water or ingredient circuits are controlled by 24V logic boards
🔧 Common use cases: espresso water, hot water line, milk/whitener circuit, rinse/drain control (machine-dependent)

🧰 Condition:
👀 Used / serviceable spares — light mineral staining consistent with normal vending use
🔩 Terminals intact (no burn/overheat)
🏷️ Labels readable — easy verification before fitting

📦 What you get:
🎁 4 × A.u.K. Müller Typ 46.008.111 valves (matching set) - for £190

🚀 Perfect for:
🧑‍🔧 Vending engineers & refurb techs
🏢 Office coffee operators / facilities teams
♻️ Rebuilders flipping machines for profit
🧰 Anyone who wants “swap-and-go” spares instead of downtime

15/01/2026

☕ Coffetek Vitro 6 (4-Canister “Gourmet”) OEM Thermoblock + Solenoid Valve Assembly (2017)

🔥 What it is:
🏭 OEM Coffetek Ltd assembly from a Vitro 6 – 4 Canister – Gourmet commercial bean-to-cup vending machine
🧊 Insulated vertical thermoblock / water chamber for temperature stability + efficient heat retention (built for high-throughput vending duty)
🧲 Multi-outlet water distribution + solenoid valve bank for routing to espresso/coffee/milk-drink pathways (the “hydraulic brain” of the machine)

🇩🇪 Premium valve hardware (the good stuff):
🧲 A.u.K. Müller (Germany) 24V DC solenoid valves—a widely used OEM in drink-dispense systems
🌡️ Hot-drink ready design (Müller valve ranges commonly rated up to ~98°C depending on series)
🔧 Modular/serviceable layout—individual valves & fittings can be replaced without scrapping the whole block

✅ Why buyers want this:
🛠️ Ideal replacement part if your Vitro 6 has: no-fill, water routing faults, sticking valves, inconsistent dispensing, or temp/flow issues
♻️ High-value spares bank: valves, fittings, brackets, terminals, and the insulated block itself
📈 Known model + known provenance

🧪 Condition:
✨ Used, commercial condition—light marks/discolouration consistent with hot-water service
🔍 No cracking or burn damage visible on the insulation block/plate
⚠️ Sold as removed (typical for vending parts): recommend buyer confirms compatibility by photo/valve layout and their Vitro 6 variant

💷 Complete assembly: £180 (strong value vs buying valves/blocks individually)

🎯 Best for:
🏢 Vending operators & engineers
🧰 Refurbishers / service techs
♻️ Parts resellers stocking Coffetek/Vitro spares

23/12/2025

🎯 Artisan Hand-Turned Woodworking Tool Set
🛠️ Crafted by a Preston Artisan | Functional Tools, Collector’s Beauty | One-of-a-Kind Pieces

💎 Masterfully Handcrafted: A Tribute to True Craftsmanship
Each tool in this collection is hand-turned from premium hardwoods — including exotic species like purpleheart and richly figured burls — bringing warmth, balance, and a tactile connection to your creative process.

🪵 SET FEATURES: Fine Tools for the Passionate Maker

🔪 Precision Cabinet Scraper Holders
👉 Function: For ultra-smooth finishing in cabinetry or luthiery — a favorite alternative to sandpaper.
🪚 Craftsmanship: Ergonomic handles, turned for comfort, each fitted with a set screw for micro-adjustments.
🌳 Materials: Exotic hardwoods (purpleheart, beech), showcasing grain and durability.
🔩 Detail: Custom angled blades held firmly — made for finesse, not force.

🔨 Lathe-Turned Wooden Carver’s Mallets
⚖️ Variety of Shapes: From classic cylindrical to teardrop heads, allowing precision control or full-weight impact.
🫱 Balanced Grip: Ringed handles improve control during long carving sessions.
🌲 Craft Woods: Ash, beech, and other select hardwoods — finished smooth and sealed for durability.

🧽 Traditional Bench Duster
✨ Function: Soft-bristled cleaner, perfect for brushing away sawdust or shavings without marring the surface.
🖐️ Comfort Handle: Turned from light hardwood with smooth contours.

🧱 Solid-Headed Mallets / Leather Burnishers
🌀 Aesthetic + Function: Artistic mallets featuring contrasting tones and burls — may also serve as leather burnishers or compact sculpting tools.
💥 Power with Precision: Dense heads and ergonomic grips allow clean, downward force without jarring rebound.
🧩 Material Detail: Some heads appear resin-stabilized or spalted — rare and collectible.

🔍 Why This Set is Special

🧑‍🎨 Not Mass-Produced: Every piece is individually turned by a Preston-based artisan. No factory shortcuts. No repetition.
🪙 Collector’s Grade: With visually stunning grain, rare woods, and unique forms — these are display-worthy and functional.
🛍️ Ready to Work or Display: Perfect for the professional woodworker, the passionate hobbyist, or the collector of beautiful tools.
🔐 Condition: Pristine. Stored immaculately. No signs of wear — these are showroom quality.

📦 What You’ll Get

✔️ 3x Cabinet Scraper Holders (adjustable)
✔️ 4x Carver’s Mallets (varying heads & weights)
✔️ 1x Bench Brush
✔️ 5x Solid-Headed Mallets/Burnishers

⚠️ Sold only as a complete artisan-crafted set. Each piece is unique — this is the only one available.

📣 Call to Action

🛒 Add heritage to your handwork. Bring home this artisan-crafted tool set — where form meets function and tradition meets touch.

🕰️ Limited availability. Once gone, it's gone forever.

🔖 £200 for the whole set

🪵 🪚 🧰 🪑
🌀 💼 🏡 🔨
🎨 ✨ 🖐️ 🛠️

23/12/2025

🔩 Vintage Industrial 4PDT Toggle Switch – Mid-Century Engineering Masterpiece

🛠️ Built to Endure – Forged for Precision
This isn't your average switch — it's a mid-20th century, 4-pole double-throw toggle switch, designed for critical-duty environments like telecom panels, military control systems, and aviation dashboards. Its mechanical integrity and industrial aesthetic put modern plastic toggles to shame.

🔧 All-Metal Chassis + Bakelite Handle
With a black Bakelite lever, brass contact hardware, and solid steel frame, this unit delivers that iconic cold war-era tactility collectors crave. The threaded collar and locking nut confirm its status as a panel-mount control device, once meant for serious circuitry.

🌀 Multi-Circuit Control – 4PDT Configuration
Supports simultaneous switching across four separate circuits — ideal for restoration projects, audio signal routing, DIY synth builds, or vintage automation rigs. Functionally superior and structurally overbuilt.

🎛️ Vintage Engineering. Modern Potential.
Whether you're building a steampunk console, restoring retro lab gear, or curating a museum-grade switchboard, this piece doesn’t just work — it commands presence. The kind of switch that clicks with authority and speaks of a time when gear was made to last a lifetime.

📐 Condition
✅ Mechanically tight
✅ No arcing or pitting
✅ Authentic 1940s–60s construction
✅ Structurally pristine — untouched contacts, clean terminals, original hardware

🧭 Likely Makers (Unmarked)
Western Electric, Allen-Bradley, or Centralab — all legendary American manufacturers known for wartime and telecom-grade components.

📦 Ideal For:
✔️ Vintage electronics restorers
✔️ Steampunk artists
✔️ Tube amp modders
✔️ Collectors of Cold War-era controls
✔️ DIY synth/module builders

💥 Don’t Settle for Plastic – Own a Piece of Industrial History!

This isn’t just a switch. It’s a functional artifact, engineered when design met durability — and built before planned obsolescence.

🔖 Price: £35

23/12/2025

🎻 Precision Handcrafted Paddle Sander Set – For Luthiers, Artisans & Woodcraft Purists 🔨

🪵 12-Piece Custom Hardwood Sanding & Shaping Paddle Kit – Built for Mastery
💼 Includes bespoke wooden carry case with stainless steel handle

🎯 Why You Need This Set
This isn't just a sanding set — it's a precision tool chest for the hands of true craftspeople. Designed for ultimate control, subtle shaping, and unparalleled access, this 12-piece paddle collection delivers finesse in every stroke.

✨ Key Features & Benefits

🔹 Fine Craftsmanship in Every Piece 🪚
Hand-shaped from diverse hardwoods, each paddle is built for comfort, control, and durability — perfect for extended workshop use.

🧱 12 Unique Profiles 🔧
Flat, faceted, and rounded paddles allow you to tackle contours, crevices, and complex curves with ease — ideal for violin ribs, fretboard edges, or cabinet runners.

🧲 Multi-Grit Surfaces 🪵
Pre-applied abrasives on select paddles, with others left bare for custom grit application — offering flexibility for every stage of sanding or polishing.

🧰 Portable Artisan’s Caddy 🪵
Hardwood storage box with integrated stainless steel handle — take your tools from bench to project with ease and elegance.

🛠️ Tailored for Luthiers & Restoration Experts 🎸
Shape necks, level braces, finesse purfling channels or clean dovetails — the applications are endless across musical instrument work and fine joinery.

🔬 No Mass Production — Just Mastery 🧡
No logos. No factory branding. Just authentic, workshop-grade craftsmanship that reflects your commitment to precision.

🧑‍🎨 Perfect For:
🎻 Luthiers & musical instrument builders
🪑 Cabinetmakers & fine joiners
🛠️ Woodcarvers & restorers
🏛️ Conservators & model makers

📦 What’s Included:
✔️ 12 hardwood paddles – mixed profiles and woods
✔️ Abrasive surfaces: pre-applied + customisable
✔️ Hardwood storage box with metal carry handle
✔️ Ready to use — dust residue shows recent action in the workshop!

🎯 Make Every Stroke Count

🔗 Limited availability – These tools are as rare as the hands that wield them. Add heritage and functionality to your bench today.

🛒 Add to Cart — For those who shape the world by hand - for just £70

Second Hand Furniture and Household Goods- Preston

19/01/2026

15/01/2026

15/01/2026

15/01/2026

15/01/2026

15/01/2026

15/01/2026

23/12/2025

23/12/2025

23/12/2025

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share